EUR
en
Plug-and-pump installation Plug in without worrying about overheating. Built-in contactor and thermal sensors protects the motor from overheating. Pumps with a built-in AquaTronic unit will electronically adjust for incorrect phase order, ensuring correct impeller rotation. Reliable and trouble-free operation Equipped with a free flow vortex impeller and a pump volute, the XJS is perfect for pumping sludge and water mixed with solids. The pump design, robust construction and premium materials ensure high wear resistance. The impeller is available in different sizes to meet your specific requirement. Min impeller diameter for duty with low water level or intermittent dry running. Max impeller diameter requires half motor or more submersed for continuous duty. (Pump can operate lying down) Serviceability The modular design of the pump range saves cost by ensuring maximum pump availability with a smaller spare parts inventory. The condition of a pump with a built-in AquaTronic unit can rapidly be checked without disassembly, using its service software. Saves energy and the environmentThe high-efficiency motor and hydraulics are combined with low friction bearings to reduce power losses. You achieve low total energy costs and minimize your carbon footprint. Environmentally safe white oil is used in the oil casing for easy inspection of seal conditions.
ABS Submersible Drainage Pump XJS 50 60Hz US
XJS 50 D -143 3-phase XJS 50 D -143 AT* 3-phase XJS 50 D -160 3-phase XJS 50 D -160 AT* 3-phase Weight: 130 lbs *AquaTronic: Built in electronic pump control.
Electric submersible pump Maximum submergence 65 ft Protection class IP 68 Max. temperature of pumped medium at max. power input and continuous duty 104ºF Max. medium density 0.0397 lbs/inch 3 pH of the pumped medium 5-8 Free passage 1 7/8″ x 2 3/8″ Max number of starts 30/hour Motor rating P 2 9 Hp Speed 3520 rpm Power cable 65 ft type AWG
XJS 50 AT: Direct on line start (DOL 575 V) with built in AquaTronic unit, which automatically adjusts phase order by dual contactors, ensuring correct motor rotation. Soft start is built in with the AquaTronic unit at 230-460 V, where three thyristors reduces start current to three times the nominal current. Here two relays ensure correct motor rotation. The AquaTronic unit monitors motor temperature, by use of NTC thermistors built into stator windings, and stops the motor at high temperature. It will also stop the motor at high amperage or if a phase is missing. XJS 50: Direct on line start with built in contactor. Pumps to be used with VFD must have terminal block instead of contactor. Thermal switches (284 ºF, ±5) built into the stator windings are connected to the contactor and stops the pump at high temperature.
2 1/2, 3, 4 hose connections 2 1/2, 3 (standard), 4 NTP threaded connections
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.