EUR
en
Southern Cross SX Solids Pumps are Pneumatic conveying units which are capable of transferring up to 60m3/hour of any flowable material with solids sizes up to 80% of the diameter of inlet. SX Solids Pumps are not a competitor for conventional pumps, they come into their own when traditional pumps fail due to the high solids nature of the material being conveyed. SX Solids Pumps are self priming and are fully sealed with zero discharge, allowing for the safe transfer of hazardous materials for environmental compliance.SX Solids Pumps are 100% air operated, relying on compressed air to create a vacuum and high airflow allowing the recovery of material up to 25 metres (82ft) and discharge it more than 1000 metres (3280ft) horizontally. With no rotating parts and no moving parts in contact with the pumped material, they are not susceptible to clogging and wear that occurs in centrifugal and submersible pumps. They do not suffer from cavitation and can be run dry indefinitely with no overheating or damage.
Air operated solids and slurry pumps. Ultra tough pumping units capable of transferring any flowable material across a wide range of agricultural, industrial, municipal, mining, oil and gas applications.
SOUTHERN CROSS SX60-V “GUZZLA”SOUTHERN CROSS SX110-V “GLUTT’N”COMPACT, LIGHTWEIGHT & MOBILE
SX Solids Pumps are designed to be easily transported and quickly deployed where and when required. Units are lightweight and fitted with either wheels or skid mounted for simple on-site mobility and deployment. Units are supplied with protective covers for operating controls and valves. They can also be fitted with roll cages and enclosures to provide additional protection and durability.
With easy access to air supply and suction and discharge pipelines, SX Solids Pump units can be deployed in less than 10 minutes. Deployment is a simple process involving the connection of suction and discharge pipes (camlock, victaulic or BSP), air hoses and then turning on the air supply. Once running, units are controlled by simply varying the suction and discharge timers to suit the material being conveyed, the distance being recovered from and the transfer distance. This allows for fully automatic operation. Alternatively, units can be manually operated using a switch to control loading and discharge times.
SX Solids Pumps require no electricity supply to operate and have been designed to safely operate in hazardous environments.
SX Solids Pumps are 100% air operated, relying on compressed air to create a vacuum and high airflow allowing the recovery of material up to 25 metres (82ft) and discharge up to 1000 metres (3280ft) horizontally.
SX Solids Pumps are designed to be easily transported and quickly deployed where and when required. Units are fitted with wheels or skid mounted for simple on-site mobility and deployment.hazardous environments.
SX Solids Pumps are capable of pumping any flowable material including liquids, liquors, slurries, mud, slimes, sand, gravel, powders and many more. Where other pumps cannot operate, SX Solids Pumps provide a simple, safe and versatile solution.
hazardous environments.There are no rotating parts and all moving parts covered to prevent entangleme nt and reduce the risk of operator injury.
With minimal moving parts and no electricity, t roubles hooting is a quick and simple process. Parts are easily replaced and fitted using readily available tools.Pentair Southern Cross provides global support for all SX Solids Pumps. Our expert operators can provide on-site demonstration s and training for new users and assist with product selection and troublesh ooting.
SX Solids Pumps have been utilised all over the world to provide effective solutions for a wide range of product transfer problems including:
Coal and other mining slurries Thickener sludge Sump, shaft and pipeline cleaning Tank and drain cleaning Tailings and ash pond cleaning Oil spill capture and transfer Hazardous waste recovery Drilling mud and cuttings Agricultural product and waste Dam desilting Bentonite, sand Effluent and processing waste Pulp and paper mill waste Tunnelling and pneumatic excavation Barge, ballast tank and ship cleaning Wash plant and under belt cleaning
There are no rotating parts and all moving parts are covered to prevent entanglement and reduce the risk of operator injury.
With minimal moving parts and no electricity, troubleshooting is a quick and simple process. Parts are easily replaced and fitted using readily available tools.Pentair Southern Cross provides global support for all SX Solids Pumps. Our expert operators can provide on-site demonstration s and training for new users and assist with product selection and troubleshooting.
SX Solids Pumps are capable of pumping any flowable material including liquids, slurries, mud, slimes, sand, powders and many more. Where other pumps cannot operate, SX Solids Pumps provide a simple, safe and versatile solution.
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.