EUR
en
Slurry Pump Main parts: • Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available. • Liners – Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable...
High Seal Slurry Pump Parts
Centrifual slurry pump spare parts–Throat bush Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Slurry pump Throat bush part code: BDE4083, BDF6083 , BDF8083. Slurry Pump Spares material Polyurethane: U01 is an erosion resistant material that performs well in elastomer applications where ‘tramp’ is a problem. This is attributed to the high tear and tensile st...
Slurry Pump Frame Plate Liner Insert completely interchangeable Slurry Pump Frame Plate Liner Insert Material 1. BDA05 is a wear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy BDA05 is provided by the presence of hard carbides within its micro-structure. Alloy BDA05 is particularly suited to applications where mild corrosion resistance, as well as erosion r...
1. Slurry pump parts Completely interchangeable with world famous brand. For unlisted slurry pump parts, OEM service offered. Drawings needed. 2. Materials High chrome alloy Natural rubber Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.
Spare parts of slurry pump 1.materil:metal or rubber 2. Lower abrasion rate, long life for wet parts. 3. Short delivery time Slurry pump spare parts We also offer Design, Installation, Repair and Maintenance solutions and Mine measuring up service, OEM service. If you have a pump problem, we have the solutions. We not only can produce the whole series of slurry, but also all the rubber wet end parts are available, we also accept OEM service, and mine site measuring up, from this we can
Boda Slurry Pump Volute Liner are completely interchangeable 1. BDA05 is a wear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy BDA05 is provided by the presence of hard carbides within its micro-structure. Alloy BDA05 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required. 2. BDA07 Marten-sic white ir...
Slurry pump spare parts mainly include bearing, expeller, frame plate liner insert, lantern ring, shaft sleeve, throatbush, impeller with high chrome alloy, impeller with rubber, as well as liner with high chrome alloy and liner with rubber. Boda pump is a professional slurry pump manufacturer based in China.Apart from slurry pump spare parts, we also offer sand pump, sump pump, FGD flue gas desulfurization pump, forth pump and more. OEM is available. Horizontal Centrifugal Slurry Pump 1. Du...
Horizontal Froth Pump Parts
14/12 A05 Slurry Pump Impeller
Boda is willing to undertake any OEM(Origin Equipment Manufacture) order for pump and mining equipment parts accoring to the drawing or sample. Considering various requirement for material in the market, we can supply wet end part material as following, metal material BDA05,BDA07,BDA12,BDA33,BDA49,BDA61 and etc. Rubber material BDR08, BDR26, BDR33,BD, BDS01, BDS12, BDS21, BDS31, BDS42 and etc. Given customer’s special request for abrasion and erosion in pumping environments, we can su...
Brief introduction The opening and closing part of the knife gate valve is the knife. The movement direction of the knife is perpendicular to the fluid direction. The medium is cut off by the blade shaped knife which can cut the fiber material. In fact, there is no chamber in the valve body. The plate rises and falls in the side guide groove, and is pressed tightly on the valve seat by the lug at the bottom. If high medium sealing performance is required, O-shaped sealing seat can be selecte...
Bookmark
Daniel Féau processes personal data in order to optimise communication with our sales leads, our future clients and our established clients.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.